Page 9 of 19

Posted on

Drilling Cost for iPhone and iPod Touch 3.0 redesigned for iOS 7

Drilling Cost for iPhone and iPod Touch 3.0

Redesigned for iOS 7

Now available on the App Store !

DC_512

Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

The Drilling Cost provides to the drillers, toolpushers, drilling engineers, students and other professionals in the petroleum industry a productivity tool helpful in drilling operation to calculate the drilling cost per length unit drilled, analysis of drill bit performance and to use in planning phase of oil wells. 
Formula: 
Drilling Cost = (Bit Cost + Rig Cost x (Drilling Time + Trip Time)) ÷ (Length Drilled)
Drilling Cost => drilling cost $ per length unit ($/ft, $/m)
Bit Cost => bit cost, $
Rig Cost => rig cost per hour, $ / hour
Drilling Time => total drilling time, hour
Trip Time => trip time, hour
Length Drilled => total length drilled by drill bit, ft or m
The Advanced Feature: 
This application provides an advanced feature that is the modeling of data Drilling Cost vs. Drilling Time and also vs. Length Drilled using quadratic regression. The minimum point of the parable may correspond to the operation time of the drill bit, where will occur the minimum cost. The more the R squared is close to 1, the result will be better.
Quadratic regressions: 
1) Drilling Cost = c + b (LD) + a (LD)^2, LD = total Length Drilled by the dril bit
2) Drilling Cost = c + b (DT) + a (DT)^2, DT = total Drilling Time by the drill bit
Data Files: 
The user can work with data files that must correspond to the drill bits used in each phase of drilling.
DC1_30_01
DC1_30_02
DC1_30_03
DC1_30_04
DC1_30_05
DC1_30_06

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Leak-Off Test Simulator for iPad 2.0 redesigned for iOS 7

Leak-Off Test Simulator for iPad 2.0 

Redesigned for iOS 7 

LotSim_512

Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

This app provides a graphical very useful tool for training of Technicians, Drillers, Toolpushers, Drilling Engineers, Students and others professionals of the oil & gas industry to simulate a leak-off test.

About the Leak-off Test on drilling operations:

A test to determine the strength or fracture pressure of the open formation, usually conducted immediately after drilling below a new casing shoe.

For new features, report bugs, improvements and suggestions please contact us: contact@wellcontrol.com.br

Notes: 

– For well control simulation, use another app “Well Control Simulator“.
– For kick tolerance analysis, use another app “Kick Tolerance“;
– For methods to control, use another app “Well Control Methods“;
– For drilling simulation, use another app “Drilling Simulator“;
– For hydraulic calculations, use another app “Drilling Hydraulics“;

These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

Features: 

1) Panel with the following parameters: pump pressure, choke pressure, mud pump speed, strokes totalizer, flow rate, mud weight and volume;
2) Intuitive graphical interface: Instruments with pointers to the parameters: DP pressure, choke pressure and open/close hydraulic choke;

3. Graph Options:

– Pressures DP / Choke and Volume Pumped versus Pumping Time;
– Pressures Dp/ Choke and Pumping Time versus Volume Pumped;

4) Panel with alarms: pump failure, bop failure and bop status;
5) Toolbar with buttons: Data File, Well Config, Restart, Ranges, Set Alarms, Graph Limits, Pause/Continue, Restart, Set BOP, Send by email, about;
6) Set drill string with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield and others (mix). Select units also per parameter;
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption and fracture;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Vertical or Slant Well Type (KOP, TVD and Measured Depth);
15) Set surface circulation equipments (mud pump and lines);
16) Save configuration to data files;
17) Select circulation options: drillpipe -> riser and drillpipe -> choke, Close/Open (Hard shut-in) the well;
18) Reset alarms: pump failure: max pump speed, max pump pressure and max pump power;
19) Register the pressures at the kill speed ;
20) Show schematic of well with drillstring;
21) Shut-in the well using hard method;
22) Circulation on slow rate (kill speed);
23) Useful for filling of Standardized Kill Sheets for Well Control;
24) Useful for Filling of Previous Recorded Sheets;
25) Analysis of the Choke Line effects in Maximum Choke Pressure;
26) Analysis of the Effect of porosity and permeability on absorption curve;
27) Simulation of the Leak-Off Test operation and Graphical Analysis of the Leak-Off Test
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;
31) Printing and email attachments with retina display ;
32) Selection of units also per parameter;
33) Ability to import well data from other apps;
34) Ability to use the iPad on landscape position on all views;
35) Recalculate DP as necessary to surface automatically with bit on bottom when editing BHA or Well Depth;  

LotSim2_20_01
LotSim2_20_02
LotSim2_20_03
LotSim2_20_04
LotSim2_20_05
LotSim2_20_06
LotSim2_20_07
LotSim2_20_08

 

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Leak-Off Test Simulator for iPhone and iPod Touch 2.0 redesigned for iOS 7

Leak-Off Test Simulator for iPhone and iPod Touch 2.0 

Redesigned for iOS 7  

iLotSim_512

Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

This app provides a graphical very useful tool for training of Technicians, Drillers, Toolpushers, Drilling Engineers, Students and others professionals of the oil & gas industry to simulate a leak-off test.

About the Leak-off Test on drilling operations:

A test to determine the strength or fracture pressure of the open formation, usually conducted immediately after drilling below a new casing shoe.

For new features, report bugs, improvements and suggestions please contact us: contact@wellcontrol.com.br

Notes:

– For well control simulation, use another app “Well Control Simulator“.
– For kick tolerance analysis, use another app “Kick Tolerance“;
– For methods to control, use another app “Well Control Methods“;
– For drilling simulation, use another app “Drilling Simulator“;
– For hydraulic calculations, use another app “Drilling Hydraulics“;

These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

Features: 

1) Panel with the following parameters: pump pressure, choke pressure, mud pump speed, strokes totalizer, flow rate, mud weight and volume;
2) Intuitive graphical interface: Instruments with pointers to the parameters: DP pressure, choke pressure and open/close hydraulic choke;

3. Graph Options:

– Pressures DP / Choke and Volume Pumped versus Pumping Time;
– Pressures Dp/ Choke and Pumping Time versus Volume Pumped;

4) Panel with alarms: pump failure, bop failure and bop status;
5) Toolbar with buttons: Data File, Well Config, Restart, Ranges, Set Alarms, Graph Limits, Pause/Continue, Restart, Set BOP, Send by email, about;
6) Set drill string with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield and others (mix). Select units also per parameter;
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption and fracture;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Vertical or Slant Well Type (KOP, TVD and Measured Depth);
15) Set surface circulation equipments (mud pump and lines);
16) Save configuration to data files;
17) Select circulation options: drillpipe -> riser and drillpipe -> choke, Close/Open (Hard shut-in) the well;
18) Reset alarms: pump failure: max pump speed, max pump pressure and max pump power;
19) Register the pressures at the kill speed ;
20) Show schematic of well with drillstring;
21) Shut-in the well using hard method;
22) Circulation on slow rate (kill speed);
23) Useful for filling of Standardized Kill Sheets for Well Control;
24) Useful for Filling of Previous Recorded Sheets;
25) Analysis of the Choke Line effects in Maximum Choke Pressure;
26) Analysis of the Effect of porosity and permeability on absorption curve;
27) Simulation of the Leak-Off Test operation and Graphical Analysis of the Leak-Off Test
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;
31) Printing and email attachments with retina display ;
32) Selection of units also per parameter;
33) Ability to import well data from other apps;
34) Ability to use the iPad on landscape position on all views;
35) Recalculate DP as necessary to surface automatically with bit on bottom when editing BHA or Well Depth;

LotSim15_20_01
LotSim15_20_02
LotSim15_20_03
LotSim15_20_04
LotSim15_20_05
LotSim15_20_06
LotSim15_20_07

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Kick Tolerance for iPad 3.0 redesigned for iOS 7

Kick Tolerance for iPad 3.0

Redesigned for iOS 7 

KT_30_HD_icon

Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

The Kick Tolerance provides to drilling engineers, chemists, technicians, students and others professionals in the Oil & Gas industry a productivity tool helpful in drilling operation (well control) and planning phase of oil wells.

This version is completely interactive and allows users to define a wide variety of parameters for oil wells, save data to files.

Notes:
– For well control simulation, use another app “Well Control Simulator“.
– For simulation of leak-off test, use another app “Leak-Off Test Simulator“;
– For methods to control, use another app “Well Control Methods“;
– For drilling simulation, use another app “Drilling Simulator“;
– For hydraulic calculations, use another app “Drilling Hydraulics“;

These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

This application deals with two concepts:

1- Kick Tolerance as Maximum Pore Equivalent Density;
2- Kick Tolerance as Maximum Kick Volume.

Both with graphical analyzes.

Other features:

1) Calculations of the Choke Line Effect;
2) Included the formulas;
3) Ability to work with data files locally and on iCloud);
4) Pop-up view to alert user about invalid values;
5) Views with calculations of capacities, volumes and more.
6) Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
7) Options wells in floating units or in drilling land rigs;
8) Choice of rheological models (Bingham and Power);
9) Hydrostatic calculations at the bottom hole and the casing shoe;
10) Selecting the system of units;
11) Selecting units also per parameter;
12) Drill string sections: drill pipe 1, drill pipe 2, Heavy-weight, drill collar 1 and drill collar 2.
13) Directional basics Hydrostatic calculations (KOP, Bottom Hole and Casing Shoe TVD and Measured Depth);
14) Ability to send data file by email;
15) Ability to open in… from Mail app;
16) Support for iTunes file sharing;
17) Ability to import data files from other apps;
18) Printing and attachments with retina display.

KT2_30_01
KT2_30_02
KT2_30_03
KT2_30_04
KT2_30_05
KT2_30_06
KT2_30_07
KT2_30_08
KT2_30_09
KT2_30_10
KT2_30_11
KT2_30_12

 

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Kick Tolerance for iPhone and iPod Touch 3.0 redesigned for iOS 7

Kick Tolerance for iPhone and iPod Touch 3.0

Redesigned for iOS 7

KT_30_icon

Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

The Kick Tolerance provides to drilling engineers, chemists, technicians, students and others professionals in the Oil & Gas industry a productivity tool helpful in drilling operation (well control) and planning phase of oil wells.This version is completely interactive and allows users to define a wide variety of parameters for oil wells, save data to files.

Notes:
– For well control simulation, use another app “Well Control Simulator”.
– For simulation of leak-off test, use another app “Leak-Off Test Simulator”;
– For methods to control, use another app “Well Control Methods”;
– For drilling simulation, use another app “Drilling Simulator”;
– For hydraulic calculations, use another app “Drilling Hydraulics”;

These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

This application deals with two concepts:

1- Kick Tolerance as Maximum Pore Equivalent Density;
2- Kick Tolerance as Maximum Kick Volume.

Both with graphical analyzes.

Other features:

1) Calculations of the Choke Line Effect;
2) Included the formulas;
3) Ability to work with data files locally and on iCloud);
4) Pop-up view to alert user about invalid values;
5) Views with calculations of capacities, volumes and more.
6) Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
7) Options wells in floating units or in drilling land rigs;
8) Choice of rheological models (Bingham and Power);
9) Hydrostatic calculations at the bottom hole and the casing shoe;
10) Selecting the system of units;
11) Selecting units also per parameter;
12) Drill string sections: drill pipe 1, drill pipe 2, Heavy-weight, drill collar 1 and drill collar 2.
13) Directional basics Hydrostatic calculations (KOP, Bottom Hole and Casing Shoe TVD and Measured Depth);
14) Ability to send data file by email;
15) Ability to open in… from Mail app;
16) Support for iTunes file sharing;
17) Ability to import data files from other apps;
18) Printing and attachments with retina display.

KT15_30_01
KT15_30_02
KT15_30_03
KT15_30_04
KT15_30_05
KT15_30_06

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Well Control Methods for iPad 3.0 redesigned for iOS 7

Well Contol Methods for iPad 3.0 

Redesigned for iOS 7 

Now available on the App Store 

(updated – 2013 nov 11)

WCM2_30_icon


Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubrication / Bleed – Top Kill

Notes:
– For well control simulation, use another app “Well Control Simulator“.
– For simulation of leak-off test, use another app “Leak-Off Test Simulator“;
– For kick tolerance analysis , use another app “Kick Tolerance“;
– For drilling simulation, use another app “Drilling Simulator“;
– For hydraulic calculations, use another app “Drilling Hydraulics“;
– For kill sheets, use another app “Well Control Worksheets” (iPad and Mac only).

 These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

WCM2_30_01
WCM2_30_02
WCM2_30_03
WCM2_30_04
WCM2_30_05
WCM2_30_06
WCM2_30_07
WCM2_30_08
WCM2_30_09
WCM2_30_10
WCM2_30_11
WCM2_30_12
WCM2_30_13
 Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Well Control Methods for iPhone and iPod Touch 3.0 redesigned for iOS 7

Well Contol Methods for iPhone and iPod Touch 3.0 

Redesigned for iOS 7 

Now available on the App Store

(updated – 2013 nov 11)

WCM1_30_icon

Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubrication / Bleed – Top Kill

Notes:
– For well control simulation, use another app “Well Control Simulator“.
– For simulation of leak-off test, use another app “Leak-Off Test Simulator“;
– For kick tolerance analysis , use another app “Kick Tolerance“;
– For drilling simulation, use another app “Drilling Simulator“;
– For hydraulic calculations, use another app “Drilling Hydraulics“;
– For kill sheets, use another app “Well Control Worksheets” (iPad and Mac only).

 These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

WCM15_30_01
WCM15_30_02
WCM15_30_03
WCM15_30_04
WCM15_30_05
WCM15_30_06
WCM15_30_07
WCM15_30_08
Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

 

Posted on

Drilling Simulator for iPad 2.0 redesigned for iOS 7

Drilling Simulator for iPad 2.0 

Redesigned for iOS 7 

DS2_512

Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield1 (US units) and Oilfield2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption, fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files and share by iCloud;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

 

DS2_20_01
DS2_20_02
DS2_20_03
DS2_20_04
DS2_20_05
DS2_20_06
DS2_20_07
DS2_20_08
DS2_20_09
DS2_20_10

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

 

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

 

Posted on

Drilling Simulator for iPhone and iPod Touch 2.0 redesigned for iOS 7

Drilling Simulator for iPhone and iPod Touch 2.0

Redesigned for iOS 7  

DS1_512

 Available_on_the_App_Store_Badge_US_UK_135x40_0824

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield (US units) and Oilfield2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption, fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files and share by iCloud;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

DS1_20_02
DS1_20_03
DS1_20_04
 DS1_20_05
 DS1_20_06
DS1_20_07

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

 

Posted on

Well Control Simulator for iPad 2.0 redesigned for iOS 7

Well Control Simulator for iPad 2.0

Redesigned for iOS 7

WCS2_512

resized__135x40_Download_on_the_App_Store_Badge_US-UK_135x40_0824_1

Features: 

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model: 
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes: 

 New screenshots

WCS2_20_01
WCS2_20_02
WCS2_20_03
WCS2_20_04
WCS2_20_05
WCS2_20_06
WCS2_20_07
WCS2_20_08
WCS2_20_09
WCS2_20_10
WCS2_20_11

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br