Page 24 of 25

Posted on

Drilling Simulator for iPhone – Introductory Level submitted for iTunes App Store

Drilling Simulator for iPhone – Introductory Level

iDrillSim_10_01.PNG

Awaiting approval by Apple.

Drilling Simulator – Introductory level provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basic drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

– Drilling (bit rotation, geolograph, neutral point);

– Hydraulics;

– Kick Detection;

– Hard Shut-in;

– Behavior of kick;

Note: This app NOT allows to control the well after the kick detection and shut-in.

The simulation ends after the simulations of underground blowout and blowout to surface.

iDrillSim_10_02.PNG iDrillSim_10_03.PNG
 iDrillSim_10_04.PNG iDrillSim_10_05.PNG
 iDrillSim_10_06.PNG  iDrillSim_10_07.PNG
 iDrillSim_10_08A.PNG  iDrillSim_10_08B.PNG
 iDrillSim_10_09A.PNG  iDrillSim_10_09B.PNG

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;

2) Instruments with pointers to the parameters: pump pressure, hookload and weight on the bit;

3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, percent of flow, rotary torque, drilling rate and flow in, flow out.

4) Panel with alarms: pump failure, vol high, flow high, bop failure and bop status;

5) Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about and Hydraulics;

6) set drillstring with drillpipe, heavy-weight and drillcollar;

7) Select floating rig or land rig;

8) Select unit systems: International, field1 (imperial) and field2 (mix);

9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;

10) Select rheological models: Power or Bingham;

11) Set gradients: fracture and temperature;

12) Set jet nozzles or fixed TFA;

13) Set choke parameters and BOP test pressure;

14) Set Surface circulation volume;

15) Set surface circulation equipments (mud pump and lines);

16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);

17) Save configuration to data files;

18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;

19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;

20) Register the kill line losses and pump pressure at the kill speed;

21) show the well with drillstring and neutrl point and show the drillbit on rotating;

22) Show schematic of well with drillstring, kick and neutral point (%);

23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;

24) Shut-in the well using hard method;

25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;

26) behavior of the kick: keeping the well closed and keeping the well opened;

27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;

28) Capacities and Volumes calculations;

29) Hydrostatic and critical pressures calculations;

30) Hydraulics calculations;

wellcontrol_url.png

contact@wellcontrol.com.br

www.wellcontrol.com.br

 

 

 

 

Posted on

Drilling Simulator for iPad – Introductory level now available on the iTunes App Store

Drilling Simulator for iPad – Introductory level

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

DrillSim_170x170_75.png

Link to iTunes App Store:  http://itunes.apple.com/us/app/drilling-simulator-introductory/id436659920?mt=8&ls=1

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight and drillcollar;
7) Select floating rig or land rig;
8) Select unit systems: International, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;
Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

Screenshots:

DRILLSIM1_01.PNG
DRILLSIM1_03.PNG
DRILLSIM1_04.PNG
DRILLSIM1_05.PNG
DRILLSIM1_02.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Drilling Simulator for iPad – Introductory level, submitted for iTunes App Store

Drilling Simulator for iPad – Introductory level

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

We are awaiting for approval by Apple.

DrillSim_170x170_75.png

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight and drillcollar;
7) Select floating rig or land rig;
8) Select unit systems: International, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

Screenshots:

 DRILLSIM1_01.PNG
DRILLSIM1_03.PNG
DRILLSIM1_04.PNG
 DRILLSIM1_05.PNG
DRILLSIM1_02.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Drilling Simulator – Introductory level, a new app for iPad coming soon

Drilling Simulator – Introductory level for iPad Provides a graphical very useful tool for training of roughnecks, derrickmen and drillers in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well.

The simulation ends after the closing of the well after the detection of the kick.

DrillSim1_01.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

WCMethods for iPad version LITE now available on iTunes App Store

WCMethods for iPad version LITE now available on iTunes App Store

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This is a limited version to default data;

The full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubrication / Bleed

Others features:

6) Calculations of Riser Safety Margin;
7) Included the formulas;
8) Pop-up view to alert user about invalid values;
9) Send resume of methods by email.
10) Views with calculations of hydrostatics, capacities, volumes and more.

Link on iTunes App Store

WCM2_12_02.PNG
WCM2_12_03.PNG
WCM2_12_04.PNG
WCM2_12_05.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Update for WCMethods for iPhone and iPod Touch, release 2.0, now available on iTunes App Store

WCMethods – Well Control Methods for iPhone, iPod Touch and iPad

release 2.0:

1) Included Heavy Weight in Drillstring;
2) Ability to move drillstring and position of kick off the bottom;
3) Improvements to the calculations of volumes and capacities;
4) Ability to print via AirPrint;
5) Ability to send screenshots by email in all views;
6) Bugs Fixed: Save/ Load data files;
7) New Look in some views;
8) Change icon;
9) Revision of code;

WCM1_170x170_75.png

Link in iTunes App Store: 
http://itunes.apple.com/app/wcmethods-full/id411837900?mt=8#

New Screenshots:

WCM_iPhone_20_01.png WCM_iPhone_20_02.png
WCM_iPhone_20_03.png WCM_iPhone_20_04.png
WCM_iPhone_20_05.png WCM_iPhone_20_06.png

Description

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubricate / Bleed

WCMethods – Well Control Methods for iPhone, iPod Touch and iPad

Contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Update for Drilling Hydraulics for iPad, release 1.3, now available on iTunes App Store

Drilling Hydraulics for iPad

New in release 1.3:

1) Fixing some issues with well configuration;
2) Improved performance;
3) Fixed the buoyancy factor calculations;
4) Fixed the formation temperature calculations for floating rig;
5) Fixed some issues with unit system;

DrillHyd.170x170_75.png

View in App Store

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Update for WCMethods for iPad, release 1.2, now available on iTunes App Store

Update for Well Control Methods for iPad, release 1.2

New in release 1.2:

1) Fixing some issues with well configuration;
2) Improved performance;
3) Fixed the buoyancy factor calculations;
4) Fixed the formation temperature calculations for floating rig;
5) Fixed some issues with unit system;
6) Bugs Fixed;
7) Ability to print well configuration data;
8) Ability to send screenshot in all views;
9) Ability to move drillstring and position of kick off the bottom;
10) New Look in some views.

wellcontrol_170x170_75.png

Link on iTunes App Store:

http://itunes.apple.com/us/app/wcmethods-for-ipad/id418501723?mt=8&ls=1

WCM2_12_01.PNG
WCM2_12_02.PNG
WCM2_12_03.PNG
WCM2_12_04.PNG
WCM2_12_05.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Update for WCMethods for iPhone and iPod Touch, release 2.0, submitted to iTunes App Store

Well Control Methods for iPhone, iPod Touch and iPad

Update 2.0:

1) Included Heavy Weight in Drillstring;
2) Ability to move drillstring and position of kick off the bottom;
3) Improvements to the calculations of volumes and capacities;
4) Ability to print via AirPrint;
5) Ability to send screenshots by email in all views;
6) Bugs Fixed: Save/ Load data files;
7) New Look in some views;
8) Change icon;
9) Revision of code;

Link to current version (1.2) in iTunes App Store: 
http://itunes.apple.com/app/wcmethods-full/id411837900?mt=8#

New Screenshots:

WCM_iPhone_20_01.png WCM_iPhone_20_02.png
WCM_iPhone_20_03.png WCM_iPhone_20_04.png
WCM_iPhone_20_05.png WCM_iPhone_20_06.png

Description

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubricate / Bleed

WCMethods – Well Control Methods for iPhone, iPod Touch and iPad

Contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Update for WCMethods for iPad, release 1.2, submitted to iTunes App Store

Well Control Methods for iPad, release 1.2

New in this release:

1) Fixing some issues with well configuration;
2) Improved performance;
3) Fixed the buoyancy factor calculations;
4) Fixed the formation temperature calculations for off-shore rig;
5) Fixed some issues with unit system;
6) Bugs Fixed; 

7) Ability to print well configuration data;
8) Ability to send screenshot in all views;

wellcontrol_170x170_75.png

http://itunes.apple.com/us/app/wcmethods-for-ipad/id418501723?mt=8#

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubricate / Bleed

Others features:

6) Calculations of Riser Safety Margin;
7) Included the formulas;
8) Ability to work with multiple files;
9) Pop-up view to alert user about invalid values;
10) Send resume of methods by email.
11) Views with calculations of hydrostatics, capacities, volumes and more.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br