Page 8 of 10

Posted on

Drilling Hydraulics for iPhone and iPod Touch 2.7 submitted to App Store: iCloud Support

Drilling Hydraulics for iPhone and iPod Touch

DrillHyd.170x170_75.png

available_appstore_icon_

New in release 2.7: 

– Sharing Data Files with iCloud.

DH1_27_03 DH1_27_03_1

The Drilling Hydraulics provides the driller, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.
Features:

1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)

DH1_25_01b DH1_24_01.png
DH1_24_02.png DH1_24_06.png
DH1_24_07.png DH1_24_04.png
DH1_24_03.png DH1_24_05.png

wellcontrol_url.png

contact@wellcontrol.com.br

 http://www.wellcontrol.com.br

Posted on

Oil & Gas Apps for Mac OS X now available on Mac App Store: iCloud Support

Update for All Apps for Mac OS X

iCloud and Data Files

all_apps_for_mac

mac_app_store

New Versions:

1. Directional Drilling Survey 2.2

2. Drilling Cost 1.1

3. Drilling Hydraulics 1.8

4. Kick Tolerance 1.3

5. Leak-Off Test Analyzer 1.1

6. Well Control Methods 1.7

7. Well Control Worksheets 1.1

New in this updates:

1. Fixes issues reported by users

2. Fixed Data File Type for each app. Launch the app by double clicking on data file icon.

3. iCloud support: Sharing Data Files with iPhone, iPod Touch and iPad (Directional Survey, Drilling Cost and Drilling Hydraulics are ok,  the next versions coming soon to the other apps)

4. Mountain Lion Tested

Data File for each App

all_apps_for_mac___data_file

Data Files on the iCloud

all_apps_for_mac___icloud

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Updates for All Apps for Mac Submitted for the Mac App Store – iCloud and Data Files

Update for All Apps for Mac

iCloud and Data Files

all_apps_for_mac

mac_app_store

New in this updates:

1. Fixes issues reported by users

2. Fixed Data File Type for each app. Launch the app by double clicking on data file icon.

3. iCloud support

4. Mountain Lion Tested

Data File for each App

all_apps_for_mac___data_file

Data Files on the iCloud

all_apps_for_mac___icloud

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Update for Drilling Hydraulics for iPhone, iPad and Mac OS X

Drilling Hydraulics

        DH1_170x170_75 DrillHyd.170x170_75  DH_150x150
        for iPhone , v2.6  for iPad, v2.4  for Mac OS X, 1.7

New in these Updates:  ability to edit nozzles coefficient by users request.

 For iPhone and iPod Touch

DH1_26_Bit

 for iPad

DH2_24_Bit

for Mac OS X

DH3_17_Bit

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Well Control Simulator for iPhone and iPod Touch now available on the iTunes App Store

Well Control Simulator for iPhone and iPod Touch

WCS1_170x170_75

on the iTunes App Store

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:
– For Simulation of drilling and kick detection, use the another app “Drilling Simulator“.
– For Simulation of leak-off test, use the another app “Leak-Off Test Simulator“;
– About methods to control, use the another app “Well Control Methods“;

These are complementary tools of this simulator;

WCS1_10_01_DM_Subsea
WCS1_10_01a_DM_Subsea
WCS1_10_01c_DM_Subsea
WCS1_10_01d_DM_Subsea
WCS1_10_02_DM_Surface
WCS1_10_03_WW_Subsea
WCS1_10_04_WW_Surface
WCS1_10_05_DynVol
WCS1_10_05a_DynVol
WCS1_10_06_VolMigBleed_Surface
WCS1_10_06a_VolMigBleed_Surface
WCS1_10_15 WCS1_10_08
WCS1_10_09 WCS1_10_07
WCS1_10_10 WCS1_10_13
WCS1_10_14 WCS1_10_12

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Well Control Simulator for iPad now available on the iTunes App Store

Well Control Simulator for iPad

WCS.170x170_75

On the iTunes App Store

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model: 
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:
– For Simulation of drilling and kick detection, use the another app “Drilling Simulator“.
– For Simulation of leak-off test, use the another app “Leak-Off Test Simulator“;
– About methods to control, use the another app “Well Control Methods“;

These are complementary tools of this simulator;

WCS2_10_01
WCS2_10_01a
WCS2_10_02
WCS2_10_03
WCS2_10_04a
WCS2_10_04
WCS2_10_05
WCS2_10_05a

Configurations

WCS2_10_06
WCS2_10_07
 WCS2_10_08

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Well Control Simulator for iPad, 1.0, submitted to the iTunes App Store

Well Control Simulator for iPad

WCS.170x170_75

Version for iPhone: coming soon

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:
– For Simulation of drilling and kick detection, use the another app “Drilling Simulator“.
– For Simulation of leak-off test, use the another app “Leak-Off Test Simulator“;
– About methods to control, use the another app “Well Control Methods“;

These are complementary tools of this simulator;

WCS2_10_01
WCS2_10_01a
WCS2_10_02
WCS2_10_03
WCS2_10_04a
WCS2_10_04
WCS2_10_05
WCS2_10_05a

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Well Control Methods for iPhone and iPod Touch, version 2.2, now available on the iTunes App Store

Well Control Methods for iPhone and iPod Touch 2.2

WCM1_25_00_160

On the iTunes App Store

New in this update 2.2:

– Added Drillpipe2 to the drillstring;
– Added Liner;
– Volumetric Methods with drillstring in the wellbore;
– Improved performance on saving data file;
– Improvements with well configuration;
– Added buttons [Surface Stack] and [Subsea Stack] on main View.

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

It is can be applied in the oilfield of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method

2. Wait and Weight

3. Dynamic Volumetric

4. Static Volumetric – Migration / Bleed

5. Static Volumetric – Lubricate / Bleed

Others:

6) calculations of Riser Safety Margin;

7) Included the formulas;

8) Ability to work with data files;

9) Sections: Riser, Casing, Liner and Open Hole;

10) Pop-up view to alert user about invalid values;

11) Send resume of methods by email.

12) Show graph theoretical of the methods.

13) Set drillstring with drillpipe1, drillpipe2, heavy weight, drillcollar1 and drillcollar2;

14) Select floating rig or land rig;

15) Select unit systems: Metric, SI, field1 (imperial) and field2 (mix);

16) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;

17) Select rheological models: Power or Bingham;

18) Set gradients: formations and temperature;

19) Set jet nozzles or fixed TFA;

20) Vertical or Slant Well Type (KOP, TVD and Measured Depth);

21) Set surface circulation equipments (mud pump and lines);

22) Save configuration to data files;

23) Show schematic of well with drillstring;

23) Useful for filling of Standardized Kill Sheets for Well Control;

24) Useful for Filling of Previous Recorded Sheets;

25) Capacities and Volumes calculations;

26) Hydrostatic and critical pressures calculations;

27) Hydraulics calculations;

WCM1_22_01
WCM1_22_02
WCM1_22_03
WCM1_22_04
WCM1_22_05
WCM1_22_06

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Drilling Hydraulics for iPhone and iPod Touch , version 2.5, now available on the iTunes App Store

Drilling Hydraulics for iPhone and iPod Touch

DrillHyd.170x170_75.png

View in App Store

New in release 2.5: 

– Fixed section open hole / drillcollar2 on surface stack;
– Improved Performance on saving data file;
– Added buttons [Surface Stack] and [Subsea Stack] on main view.

The Drilling Hydraulics provides the driller, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.

Features: 

1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)

DH1_25_01b DH1_24_01.png
DH1_24_02.png DH1_24_06.png
DH1_24_07.png DH1_24_04.png
DH1_24_03.png DH1_24_05.png

wellcontrol_url.png

contact@wellcontrol.com.br

 http://www.wellcontrol.com.br

Posted on

Drilling Hydraulics for iPad, version 2.3, now available on iTunes App Store

Drilling Hydraulics HD (for iPad)

DrillHyd.170x170_75.png

View in App Store

New in release 2.3: 

– Fixed section open hole / drillcollar2 on surface stack;
– Improved Performance on saving data file;

The Drilling Hydraulics provides the driller, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.

Features:

1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)

DH2_22_01.PNG
DH2_22_02_2.PNG
DH2_22_07.PNG

DH2_22_06.PNG
DH2_22_03.PNG

DH2_22_04.PNG
DH2_22_05.PNG

wellcontrol_url.png
contact@wellcontrol.com.br

http://www.wellcontrol.com.br