Page 8 of 11

November 9, 2013November 10, 2013

Well Control Methods for iPhone and iPod Touch 3.0 redesigned for iOS 7

Well Contol Methods for iPhone and iPod Touch 3.0

Redesigned for iOS 7

Now available on the App Store

(updated – 2013 nov 11)

Features:

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubrication / Bleed – Top Kill

Notes:

– For well control simulation, use another app “Well Control Simulator“.

– For simulation of leak-off test, use another app “Leak-Off Test Simulator“;

– For kick tolerance analysis , use another app “Kick Tolerance“;

– For drilling simulation, use another app “Drilling Simulator“;

– For hydraulic calculations, use another app “Drilling Hydraulics“;

– For kill sheets, use another app “Well Control Worksheets” (iPad and Mac only).

These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 31, 2013

Drilling Simulator for iPad 2.0 redesigned for iOS 7

Drilling Simulator for iPad 2.0

Redesigned for iOS 7

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield1 (US units) and Oilfield2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption, fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files and share by iCloud;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 31, 2013

Drilling Simulator for iPhone and iPod Touch 2.0 redesigned for iOS 7

Drilling Simulator for iPhone and iPod Touch 2.0

Redesigned for iOS 7

DS1_512

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield (US units) and Oilfield2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption, fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files and share by iCloud;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 31, 2013October 31, 2013

Well Control Simulator for iPad 2.0 redesigned for iOS 7

Well Control Simulator for iPad 2.0

Redesigned for iOS 7

Features:

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:

For simulation of drilling and kick detection, use another app “Drilling Simulator“.
For simulation of leak-off test, use another app “Leak-Off Test Simulator“;
For methods to control, use another app “Well Control Methods“;
For kick tolerance calculations, use another app “Kick Tolerance“;
For hydraulic calculations, use another app “Drilling Hydraulics“;

New screenshots

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 23, 2013October 23, 2013

Well Control Simulator for iPhone and iPod Touch 2.0 – Redesigned for iOS 7

Well Control Simulator for iPhone and iPod Touch 2.0

Coming soon !

WCS1_20_02

Current version

User Guide Web Version Download PDF

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:
– For Simulation of drilling and kick detection, use the another app “Drilling Simulator“.
– For Simulation of leak-off test, use the another app “Leak-Off Test Simulator“;
– About methods to control, use the another app “Well Control Methods“;

These tools can complement (work with) this simulator by creating files which can be used in this application;

New Screenshots

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

September 27, 2013

Drilling Hydraulics Basic for iPhone, iPod Touch and iPad 1.1 – iOS 7 support

Drilling Hydraulics BASIC

for iPhone, iPod Touch and iPad

This app is designed for both iPhone and iPad

Drilling Hydraulics Basic provides an useful tool to students, drillers, technicians, drilling engineers and other professionals of the oil well drilling.

Basic Concepts, Formulas and Calculations:

– Capacities and Volumes
– Mud Properties and Gradient
– Temperature Gradient
– Pressure Gradient
– Hydrostatic Pressure
– Mud Pump Output
– Drill Bit Losses
– Friction Losses
– ECD – Equivalent Circulating Density
– Calculations with Well Closed (KMW, FIT, LOT)

Formulas:
– The factors/constants are calculated based on different units of measures

iCloud:
– Auto saves to restore when to open the app again
– Shares the same data on devices with same Apple ID

Note:

These calculations tools are available on the app “Drilling Hydraulics” for iPhone, “Drilling Hydraulics HD” for iPad and “Drilling Hydraulics” for Mac OS X, also on the App Store. But, they are with formulas and more easily accessible in this app.

New in version 1.1:

– Added support for iOS 7
– Added calculations with well closed (KMW/FIT/LOT)
– Added some Units of measure
– And other improvements

Screenshots for iPhone and iPod Touch

Screenshots for iPad

Visit our website for more Oil & Gas apps.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

September 26, 2013

Directional Calculations for iPhone, iPod Touch and iPad 1.1 – iOS 7 support

Directional Calculations

for iPhone, iPod Touch and iPad

Version 1.1 – Adds support for iOS 7

Coming Soon !!!

DD_Calc_320

This app is applied in the oil well drilling and provides a useful tool to make the calculations more common in directional drilling to help students, drillers, technicians, drilling engineers and other professionals of Oil and Gas industry.

– Calculates the survey parameters between two survey stations using the five methods (tangential, tangential balanced, minimum curvature, radius of curvature and average angle)
– Calculates the parameters of the 2D wells (types I, II and horizontal)
– Calculates the parameters of a 3D section (changing of the inclination and azimuth between the sections)
– Calculates the projection of the Horizontal Departure on the target azimuth (vertical section)
– Saves data on iCloud to share between iPhone, iPod Touch and iPad

Note:

These calculations tools are available on the app “Directional Survey” for iPhone and “Directional Survey HD” for iPad and “Directional Drilling” for Mac OS X, also available on the App Store.

This app is designed for both iPhone and iPad. It can to be installed on iPhone, iPod Touch and iPad.