Page 13 of 13

Posted on

Well Control Simulator for iPad, 1.0, submitted to the iTunes App Store

Well Control Simulator for iPad

WCS.170x170_75

Version for iPhone: coming soon

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:
– For Simulation of drilling and kick detection, use the another app “Drilling Simulator“.
– For Simulation of leak-off test, use the another app “Leak-Off Test Simulator“;
– About methods to control, use the another app “Well Control Methods“;

These are complementary tools of this simulator;

WCS2_10_01
WCS2_10_01a
WCS2_10_02
WCS2_10_03
WCS2_10_04a
WCS2_10_04
WCS2_10_05
WCS2_10_05a

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Well Control Methods for Mac OS X Lion, version 1.5.2, now available on the Mac App Store

Well Control Methods for Mac OS X (Lion Version)

WCM3_15_00

Mac App Store

The Well Control for Mac provides to drillers, tool pushers, engineers, chemists, students and other professionals in Oil & Gas industry a productivity tool helpful in drilling of oil wells the understanding the methods of well control.

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and landing rigs.

Well Control Methods: 

1. Driller’s Method
2. Wait and Weight
3. Static Volumetric: Migration;
4. Static Volumetric: Lubricate and Bleed (Top Kill)
5. Dynamic Volumetric

Others features: 

1) Calculations of Riser Safety Margin;
2) Included the formulas;
3) Ability to work with data files;
4) Pop-up view to alert user about invalid values (option);
5) Ability to move drillstring and position of kick off the bottom;
6) Views with calculations of hydrostatics, capacities, volumes and more.
7) Defining the parameters of the well, drillstring, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
8) Options wells in floating units or in drilling land rigs;
9) Choice of rheological models (Bingham and Power);
10) Calculation of the ECD on bottom hole and the casing shoe;
11) Hydrostatic calculations at the bottom hole and the casing shoe;
12) Selecting the system of units;
15) Drill string sections: Drillpipe1, Drillpipe2, Heavy Weight, drill collar 1 and drill collar 2.
16) Included Qty / Size of Jet Nozzles;
17) Option for Bit TFA fixed;
18) View for Internal pipe and Annulus friction losses and hydrostatic calculations.
19) Directional basics Hydrostatic calculations (KOP, Bottom Hole and Casing Shoe TVD and Measured Depth)
20) Summary of methods;
21) Sections in the well: Riser, Casing, Liner and Open Hole.

New in this update 1.5.2:

– Added Drillpipe 2 to the drillstring;
– Added Liner;
– Improved performance on saving data file;
– Improvements with well configuration; 

WCM3_15_01
 WCM3_15_02
WCM3_15_03
WCM3_15_04b
WCM3_15_04a
WCM3_15_04
 WCM3_15_05b
 WCM3_15_05a
WCM3_15_05
 WCM3_15_06_1
 WCM3_15_07
 WCM3_15_08

wellcontrol_url.png

contact@wellcontrol.com.br
http://www.wellcontrol.com.br 

Posted on

Created new group on LinkedIn: Oil & Gas Systems

Oil & Gas Systems Group

wellcontrol_url.png

 A professional and networking group dedicated to the development of systems for Oil & Gas industry. My goal is to create a world wide network of Developers (Software & Automation) where they can share yours websites, products, new techniques, papers and news . This group is open to all.

link: http://www.linkedin.com/groups/Oil-Gas-Systems-4152498

 

Posted on

Drilling Simulator for iPhone, release, 1.2, now available on the iTunes App Store

Drilling Simulator for iPhone – Introductory Level

iDrillSim_10_01.PNG

iTunes App Store

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

New in this release:
– iOS5 Tested;
– Improvements with data input: now there is no need to tap [done] for each entry, only on the last text field.
– Option to select Vertical or Directional Well;
– Option to select unit systems: Metric, SI, Field1 (Imperial) and Field2 (mix);
– Improved the feature save/load data file;
– Added Drillcollar 2 on the drillstring;
– Save the graph in the data file;

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: METRIC, SI, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

iDrillSim_10_02.PNG iDrillSim_10_03.PNG
DS11_12_03.jpg DS1_12_04.jpg
iDrillSim_10_06.PNG iDrillSim_10_07.PNG
iDrillSim_10_08A.PNGiDrillSim_10_08B.PNG
iDrillSim_10_09A.PNGiDrillSim_10_09B.PNG

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Drilling Simulator for iPad, release 1.2, now available on the iTunes App Store

Drilling Simulator for iPad – Introductory level

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

DrillSim_170x170_75.png

Link to iTunes App Store:  http://itunes.apple.com/us/app/drilling-simulator-introductory/id436659920?mt=8

New in this release 1.2:

– iOS5 Tested;
– Improvements with data input: now there is no need to tap [done] for each entry, only on the last text field.
– Option to select Vertical or Directional Well;
– Option to select unit systems: Metric, SI, Field1 (Imperial) and Field2 (mix);
– Improved the feature save/load data file;
– Added Drillcollar 2 on the drillstring;
– Save the graph in the data file;

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: METRIC, SI, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

Screenshots:

DRILLSIM1_01.PNG
DRILLSIM1_03.PNG
DRILLSIM1_04.PNG
DRILLSIM1_05.PNG
DS2-12_05_1.png

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Drilling Simulator for iPhone and iPod Touch, release 1.2, submitted to the iTunes App Store

Drilling Simulator for iPhone – Introductory Level

iDrillSim_10_01.PNG

iTunes App Store

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

New in this release:
– iOS5 Tested;
– Improvements with data input: now there is no need to tap [done] for each entry, only on the last text field.
– Option to select Vertical or Directional Well;
– Option to select unit systems: Metric, SI, Field1 (Imperial) and Field2 (mix);
– Improved the feature save/load data file;
– Added Drillcollar 2 on the drillstring;
– Save the graph in the data file;

Features: 

 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: METRIC, SI, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

iDrillSim_10_02.PNG iDrillSim_10_03.PNG
DS11_12_03.jpg DS1_12_04.jpg
iDrillSim_10_06.PNG iDrillSim_10_07.PNG
iDrillSim_10_08A.PNG

iDrillSim_10_08B.PNG
iDrillSim_10_09A.PNG

iDrillSim_10_09B.PNG

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Drilling Simulator for iPad, release 1.2, submitted to the iTunes App Store

Drilling Simulator for iPad – Introductory level

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

DrillSim_170x170_75.png

Link to iTunes App Store:  http://itunes.apple.com/us/app/drilling-simulator-introductory/id436659920?mt=8

New in this release 1.2:

– iOS5 Tested;
– Improvements with data input: now there is no need to tap [done] for each entry, only on the last text field.
– Option to select Vertical or Directional Well;
– Option to select unit systems: Metric, SI, Field1 (Imperial) and Field2 (mix);
– Improved the feature save/load data file;
– Added Drillcollar 2 on the drillstring;
– Save the graph in the data file;

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: METRIC, SI, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

Screenshots:

DRILLSIM1_01.PNG
DRILLSIM1_03.PNG
DRILLSIM1_04.PNG
DRILLSIM1_05.PNG
DS2-12_05_1.png

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Posted on

Drilling Simulator for iPhone – Introductory Level now available on the iTunes App Store

Drilling Simulator for iPhone – Introductory Level

iDrillSim_10_01.PNG

iTunes App Store

Drilling Simulator – Introductory level provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basic drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

– Drilling (bit rotation, geolograph, neutral point);

– Hydraulics;

– Kick Detection;

– Hard Shut-in;

– Behavior of kick;

Note: This app NOT allows to control the well after the kick detection and shut-in.   The simulation ends after the simulations of underground blowout and blowout to surface. 

iDrillSim_10_02.PNG iDrillSim_10_03.PNG
iDrillSim_10_04.PNG iDrillSim_10_05.PNG
iDrillSim_10_06.PNG iDrillSim_10_07.PNG
iDrillSim_10_08A.PNGiDrillSim_10_08B.PNG
iDrillSim_10_09A.PNGiDrillSim_10_09B.PNG

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;

2) Instruments with pointers to the parameters: pump pressure, hookload and weight on the bit;

3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, percent of flow, rotary torque, drilling rate and flow in, flow out.

4) Panel with alarms: pump failure, vol high, flow high, bop failure and bop status;

5) Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about and Hydraulics;

6) set drillstring with drillpipe, heavy-weight and drillcollar;

7) Select floating rig or land rig;

8) Select unit systems: International, field1 (imperial) and field2 (mix);

9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;

10) Select rheological models: Power or Bingham;

11) Set gradients: fracture and temperature;

12) Set jet nozzles or fixed TFA;

13) Set choke parameters and BOP test pressure;

14) Set Surface circulation volume;

15) Set surface circulation equipments (mud pump and lines);

16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);

17) Save configuration to data files;

18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;

19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;

20) Register the kill line losses and pump pressure at the kill speed;

21) show the well with drillstring and neutrl point and show the drillbit on rotating;

22) Show schematic of well with drillstring, kick and neutral point (%);

23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;

24) Shut-in the well using hard method;

25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;

26) behavior of the kick: keeping the well closed and keeping the well opened;

27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;

28) Capacities and Volumes calculations;

29) Hydrostatic and critical pressures calculations;

30) Hydraulics calculations;

wellcontrol_url.png

contact@wellcontrol.com.br

www.wellcontrol.com.br

Posted on

Driller’s Method – formulas used in application WCMethods for iPhone, iPad and Mac

Well Control Methods for iPhone and iPod Touch – WCMethods

WCM1_30_icon

 

Download on the App Store

 

Description

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This app is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the oilfield and also help on understanding the methods of the well control.
Well Control Methods:

For Simulation, use the another app “Well Control Simulation”.

For new features, report bugs, improvements and suggestions please contact us: contact@wellcontrol.com.br

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubricate / Bleed

Others:

6) calculations of Riser Safety Margin;
7) Included the formulas;
8) Ability to work with multiple files;
9) Sections: Riser, Casing, Liner and Open Hole;
10) Pop-up view to alert user about invalid values;
11) Send resume of methods by email.
12) Show graph theoretical of the methods.
13) Set drillstring with drillpipe1, drillpipe2, heavy weight, drillcollar1 and drillcollar2;
14) Select floating rig or land rig;
15) Select unit systems: Metric, SI, field1 (US Unit) and field2 (mix) or per parameter;
16) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
17) Select rheological models: Power or Bingham;
18) Set gradients: formations and temperature;
19) Set jet nozzles or fixed TFA;
20) Vertical or Slant Well Type (KOP, TVD and Measured Depth);
21) Set surface circulation equipments (mud pump and lines);
22) Save configuration to data files;
23) Show schematic of well with drillstring;
23) Useful for filling of Standardized Kill Sheets for Well Control;
24) Useful for Filling of Previous Recorded Sheets;
25) Capacities and Volumes calculations;
26) Hydrostatic and critical pressures calculations;
27) Hydraulics calculations;

The Driller’s Method

During drilling operation of oil wells, there may be inflow of formation fluids into the well, which is an undesirable condition. The driller should detect such events and closing the well immediately. Record information after the closing of the well corresponding to stabilization of pressure, volume gain, SIDPP (Shut-in Drillpipe Pressure) and SICP (Shut-in Casing Pressure. In the case of operations on floating units (subsea stack), this term could be redefined as Shut-in Choke Pressure).
The control method to be applied is the driller’s method. That is to circulate the influx even with the original weight of the mud, keeping constant the circulation pressure named ICP – Initial Pressure Circulation. The second circulation should be made with the kill mud weight in two steps:
1. Fill the drill string until the bit by keeping the pressure at the Choke (at the KILL, on subsea stack) constant and equal to SIDPP.
2. Complete circulation of the annular to the surface keeping the pressure of circulation with the kill mud constant named FCP – Final Circulation Pressure. On subsea stack, after the choke fully open, the pump pressure increases until FCP 2.

Attention: about drill bit off bottom

This method should only be applied with the drill bit in the bottom hole or when the kick is completely in annular of the drill string. To minimize errors of calculation of the kill mud weight, the calculations made in this application considers the depth of the drill bit instead of the depth of the well to calculate the kill mud weight.
The formation pressure consider the depth of well. In case of top of the kick bellow the bit, it is recommended to apply the volumetric method until kick go through the drill bit to the annular, following then the driller’s method.

Formulas:

ICP = Pks + SIDPP

  ICP =  Inital Circulation Pressure, psi
  Pks = Recorded pump pressure at the kill rate speed, psi
  SIDPP = Shut-in Drillpipe Pressure, psi

  Notes about floating units:
     a) Pks must be recorded by circulating riser;
     b) Record the friction loss in the choke line at the kill rate speed, psi;

KM = OM + SIDPP / (0.052 x TVD)

 KM = Kill Mud Weight, ppg
 OM = Original Mud Weight, ppg
 TVD = True Vertical Depth, ft

FCP = Pks x KM / OM

   FCP = Final Circulation Pressure, psi

FCP 2 = (Pks + ΔPcl) x KM / OM

   FCP 2 - Final Circulation Pressure with Kill Mud at Choke, psi
   ΔPcl - Choke Line Friction, psi

 

Summary of method

STEPS PUMP PRESSURE KILL PRESSURE CHOKE PRESSURE VOLUME TO PUMP
Bring the pump to kill speed – SICP SICP – Choke line friction loss –
Circulate out the influx to surface ICP – – Bit to Surface
Circulate to fill drill string with kill mud – SIDPP SIDPP – Choke line friction loss Surface to Bit
Circulate to fill annular with kill mud FCP – – Bit to Surface

Formulas used in calculations of this method:

  WCMethods_Formulas1

Screenshot from WCMethods:

WCM1_DM_01

WCM1_DM_02

Example in Well Control Simulator:

Screenshot from Well Control Simulator for iPhone and iPod Touch:

Wells with Surface Stack

Driller’s Method

surfacedmxstk2

 

Wait and Weight Method (Engineer’s Method)

surfacewwxstk2

Wells with Subsea Stack

Driller’s Method
subseadmxstk2

Wait and Weight Method (Engineer’s Method)
subseawwxstk2

 

Importing Data from other Apps:


Well Control
Simulator
iPhone | iPad
Drilling
Simulator
iPhone | iPad
Leak-Off Test
Simulator
iPhone | iPad

Kick Tolerance
iPhone | iPad
Mac OS X
Drilling Hydraulics
iPhone | iPad
Mac OS X		  

 

Well Control Methods HD (for iPad):

WCM2_DM_04
WCM2_DM_01
WCM2_DM_02
WCM2_DM_03

Well Control Methods for Mac:

WCM3_DM_01
WCM3_DM_02
WCM3_DM_03
WCM3_DM_04

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br