Page 3 of 6
Riser Safety Margin
New app – It’s FREE !
for iPhone, iPad and iPod touch
This app is a tool for application on deepwater drilling operations (Oil & Gas).
The slight increase in mud weight needed to offset the loss in hydrostatic pressure at bottom of the borehole when the riser is disconnected from the bop (emergency disconnection) and the hydrostatic pressure of the mud to the mud line into the drilling riser is replaced by the hydrostatic of the column of sea water.
Emergency disconnection can occur in blackout condition, failure of the dynamic positioning system, etc on drillship or semi-submersible platform.
It’s for iOS only
(iPhone, iPad and iPod touch)
Available on the App Store !
Did you like our content?
- Please Follow Us!
- Share your experience with your friends!
Thanks
Share this:
Drilling Simulator 3 Lite
A Drilling Simulator 3 Lite version
designed for both iPhone and iPad
Drilling Simulator 3 (full version)
all of drilling simulator 2 PLUS:
1 – until 03 single kick bubbles on the borehole simultaneously
2 – standpipe manifold and choke manifold with 02 chokes and straight through
3 – Complications: failures schedule with Random option:
– Mud Pumps 1 and 2 “power end failure” or “fluid end failure”,
– Chokes 1 and 2 “plugged” or “washed”,
– One Drill Bit Nozzle “plugged” or “washed”
Drilling Simulator 3 LITE (This App)
all of drilling simulator 3 for 20 minutes of simulation:
This is a Lite version of the “Drilling Simulator 3” with full features for 20 minutes. This time is sufficient in this simulator for drilling until kick detection, shut-in the well, stabilization of pressures and to start the well circulation using a hydraulic choke panel to control.
Attention: Some features are disabled by default.
If you liked it, please share your experience!
iPhone XS Max version:
iPad Pro 12.9 inch:
Share this:
Dynamic Lubricate and Bleed
Well Control Method on Surface BOP
Visit our Portfolio on the App Store
for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Share this:
Well Control Simulator HD
For iPad only
Description
Well Control Simulator provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in the well control procedures.
– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Hydraulics and Hydrostatics;
– Behavior of the kick;
– Applied with subsea stack and surface stack;
– Set well with until 4 sections: riser, casing, liner, open well;
– Set Drillstring with drillpipe1, drillpipe2, heavy weight, drillcollar1, drillcolar2
Kick Model in this simulator:
The model assumes that the kick starts as a single bubble at the bottom of hole and migrates upward as a single bubble from the bottom to the surface. In underbalanced condition (BHP<Form Pressure) during control, the single bubble volume is incremented with the inflow volume from formation to the well.
Notes:
– In this simulator, the student inputs the parameters of the kick and applies a method to control.
– No drilling. For drilling simulation and kick detection, check the Drilling Simulators apps available in our portfolio”.
– Visit the our website for User’s Guide.
Visit our Portfolio on the App Store
for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Share this:
Kick Tolerance as Maximum Kick Volume
Kick Tolerance as Maximum Kick Volum
Visit our Portfolio on the App Store
for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Share this:
Drilling Simulator 3 – New Version 2.0 – iPhone version
Drilling Simulator 3
designed for both iPhone and iPad
New Version 2.0 now available on the App Store !!!
Drilling Simulator 1:
– Drilling on vertical well, kick detection, shut-in, stabilisation of pressures (sidpp, sicp, kick volume), save to iCloud to import from other app “Well Control Simulator”.
Drilling Simulator 2:
all of drilling simulator 1 PLUS Direcional and horizontal wells, well control using 01 choke and 01 single kick bubble on borehole and graphical analysis.
Drilling Simulator 3 (This App)
all of drilling simulator 2 PLUS:
1 – until 03 single kick bubbles on the borehole simultaneously
2 – standpipe manifold and choke manifold with 02 chokes and straight through
3 – Complications: failures schedule with Random option:
– Mud Pumps 1 and 2 “power end failure” or “fluid end failure”,
– Chokes 1 and 2 “plugged” or “washed”,
– One Drill Bit Nozzle “plugged” or “washed”
New in the next update (version 2.0 – Coming soon):
– Improved circulation options with subsea valves upper kill & lower kill & upper choke
– On subsea wells, now it is possible to circulate kill mud in the kill line & riser after filling choke line with kill mud weight, keeping bop closed.
– On surface wells, added upper kill line, upper choke and a check valve in kill line
– improved visual of the gauges.
Visit our Portfolio on the App Store
for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.
Well Control 
You must be logged in to post a comment.