 |
 |
 |
| for iPhone , v2.6 | for iPad, v2.4 | for Mac OS X, 1.7 |
New in these Updates: ability to edit nozzles coefficient by users request.
contact@wellcontrol.com.br
Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.
– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;
Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.
Notes:
– For Simulation of drilling and kick detection, use the another app “Drilling Simulator“.
– For Simulation of leak-off test, use the another app “Leak-Off Test Simulator“;
– About methods to control, use the another app “Well Control Methods“;
These are complementary tools of this simulator;
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
New in release 2.3:
– Fixed section open hole / drillcollar2 on surface stack;
– Improved Performance on saving data file;
The Drilling Hydraulics provides the driller, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.
1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)
 |
 |
|
|
 |
contact@wellcontrol.com.br
Drilling Hydraulics for Mac OS X Lion
Drilling Hydraulics on Mac App Store
The Drilling Hydraulics provides to drillers, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.
New in the next Version 1.6
– Fixed section open hole / drillcollar2 on surface stack;
– Improved Performance on saving data file;
Features:
1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling land rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and on the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing shoe or liner shoe;
9. Hydrostatic calculations at the bottom hole and the casing shoe or liner shoe;
10. Calculation of bottoms up time;
11. Pressure x Flow Rate and scale definition. Ability to change bit depth, bit TFA, pump Speed or pump flow for instantaneous plotting.
12. Selecting the system of units;
13. Saves the data to reload later.
14. Well Sections: Liner, Casing, Liner and Open Hole;
15. Drillstring sections: drillpipe1, drillpipe 2, Heavy-weight, drillcollar 1 and drill collar 2.
16. Included Qty / Size of Jet Nozzles;
17. Option for Bit TFA fixed;
18. Basic Directional Hydrostatic calculations (Bottom Hole and Casing/Liner Shoe TVD and Measured Depth)
 |
 |
 |
 |
contact@wellcontrol.com.br
Drilling Cost for Mac OS X
Drilling Cost per length unit drilled
The Drilling Cost provides to the drillers, toolpushers, drilling engineers, students and other professionals in the petroleum industry a productivity tool helpful in drilling operation to calculate the drilling cost per length unit drilled, analyze of drill bit performance and to use in planning phase of oil wells.
Drilling Cost = (B$ + RC$ (DT + TT)) ÷ LD
Cost = drilling cost per length unit
B$ = bit cost, $
RC = rig cost per hour, $ / h
DT = drilling time, h
TT = trip time, h
LD = length drilled (ft,m)
This application provides an advanced feature that is the modeling of data Drill Cost vs. Length Drilled using quadratic regression. The minimum point of the parable may correspond to the time of the drill bit, where will occur the minimum cost. The more the R squared is close to 1, the result will be better.
1. Drilling Cost = c + b (LD) + a (LD)ˆ2
2. Drilling Cost = c + b (DT) + a (DT)ˆ2
 |
|
|
contact@wellcontrol.com.br
Drilling Hydraulics for Mac OS X Lion
Drilling Hydraulics on Mac App Store
The Drilling Hydraulics provides to drillers, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.
New in the next Version 1.5
– Added Drill Pipe 2 and LINER;
– Input Pump Speed, Pump Flow and Bit TFA by keyboard.
– Change Velocity unit from ft/s to ft/min.
Features:
1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling land rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and on the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing shoe or liner shoe;
9. Hydrostatic calculations at the bottom hole and the casing shoe or liner shoe;
10. Calculation of bottoms up time;
11. Pressure x Flow Rate and scale definition. Ability to change bit depth, bit TFA, pump Speed or pump flow for instantaneous plotting.
12. Selecting the system of units;
13. Saves the data to reload later.
14. Well Sections: Liner, Casing, Liner and Open Hole;
15. Drillstring sections: drillpipe1, drillpipe 2, Heavy-weight, drillcollar 1 and drill collar 2.
16. Included Qty / Size of Jet Nozzles;
17. Option for Bit TFA fixed;
18. Basic Directional Hydrostatic calculations (Bottom Hole and Casing/Liner Shoe TVD and Measured Depth)
 |
 |
 |
 |
contact@wellcontrol.com.br
www.wellcontrol.com.br
Drilling Hydraulics HD (for iPad)
New in release 2.2:
1. Added Drill Pipe 2 in the drillstring;
2. Review of Hydraulics Calculations;
3. Added LINER;
4. Fixed issues with Well Configuration.
5. Fix some bugs.
Features:
1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)
|
|
|
|
|
|
|
contact@wellcontrol.com.br
www.wellcontrol.com.br
Drilling Hydraulics HD (for iPad)
New in release 2.2:
1. Added Drill Pipe 2 in the drillstring;
2. Review of Hydraulics Calculations;
3. Added LINER;
4. Fixed issues with Well Configuration.
5. Fix some bugs.
The Drilling Hydraulics provides the driller, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.
Features:
1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)
 |
|
 |
 |
|
contact@wellcontrol.com.br
www.wellcontrol.com.br
Drilling Hydraulics for Mac OS X Lion
Drilling Hydraulics on Mac App Store (version 1.4)
The Drilling Hydraulics provides the driller, tool pushers, engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.
New in the next Version 1.5
– Added Drill Pipe 2 and Liner;
– Input Pump Speed, Pump Flow and Bit TFA by keyboard.
– Change Velocity unit from ft/s to ft/min.
Features:
1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling land rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and on the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing shoe or liner shoe;
9. Hydrostatic calculations at the bottom hole and the casing shoe or liner shoe;
10. Calculation of bottoms up time;
11. Pressure x Flow Rate and scale definition. Ability to change bit depth, bit TFA, pump Speed or pump flow for instantaneous plotting.
12. Selecting the system of units;
13. Saves the data to reload later.
14. Ability to work with multiple files;
15. Drill string sections: drillpipe1, drillpipe 2, Heavy-weight, drillcollar 1 and drill collar 2.
16. Included Qty / Size of Jet Nozzles;
17. Option for Bit TFA fixed;
18. Basic Directional Hydrostatic calculations (KOP, Bottom Hole and Casing Shoe TVD and Measured Depth)
|
|
|
| |
contact@wellcontrol.com.br
A professional and networking group dedicated to the development of systems for Oil & Gas industry. My goal is to create a world wide network of Developers (Software & Automation) where they can share yours websites, products, new techniques, papers and news . This group is open to all.
link: http://www.linkedin.com/groups/Oil-Gas-Systems-4152498
Well Control 
You must be logged in to post a comment.