Page 9 of 11

November 10, 2013November 10, 2013

Well Control Methods for iPad 3.0 redesigned for iOS 7

Well Contol Methods for iPad 3.0

Redesigned for iOS 7

Now available on the App Store

(updated – 2013 nov 11)

Features:

This application uses the basic calculations of the methods to control oil wells after the occurrence of kick during drilling operations on floating platforms and land rigs.

This full version is completely interactive and allows users to define a wide variety of parameters for oil wells and unit system, save data and more.

It is can be applied in the field of petroleum and also help in understanding the methods of well control.

Well Control Methods:

1. Driller’s Method
2. Wait and Weight
3. Dynamic Volumetric
4. Static Volumetric – Migration / Bleed
5. Static Volumetric – Lubrication / Bleed – Top Kill

Notes:

– For well control simulation, use another app “Well Control Simulator“.

– For simulation of leak-off test, use another app “Leak-Off Test Simulator“;

– For kick tolerance analysis , use another app “Kick Tolerance“;

– For drilling simulation, use another app “Drilling Simulator“;

– For hydraulic calculations, use another app “Drilling Hydraulics“;

– For kill sheets, use another app “Well Control Worksheets” (iPad and Mac only).

These tools can complement (work with) this simulator by importing /exporting data files which can be used in this application;

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 31, 2013

Drilling Simulator for iPad 2.0 redesigned for iOS 7

Drilling Simulator for iPad 2.0

Redesigned for iOS 7

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield1 (US units) and Oilfield2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption, fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files and share by iCloud;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 31, 2013

Drilling Simulator for iPhone and iPod Touch 2.0 redesigned for iOS 7

Drilling Simulator for iPhone and iPod Touch 2.0

Redesigned for iOS 7

DS1_512

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2;
7) Select floating rig or land rig;
8) Select unit systems: Metric, SI, Oilfield (US units) and Oilfield2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: absorption, fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files and share by iCloud;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 31, 2013October 31, 2013

Well Control Simulator for iPad 2.0 redesigned for iOS 7

Well Control Simulator for iPad 2.0

Redesigned for iOS 7

Features:

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.

– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:

For simulation of drilling and kick detection, use another app “Drilling Simulator“.
For simulation of leak-off test, use another app “Leak-Off Test Simulator“;
For methods to control, use another app “Well Control Methods“;
For kick tolerance calculations, use another app “Kick Tolerance“;
For hydraulic calculations, use another app “Drilling Hydraulics“;

New screenshots

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

October 2, 2013

Directional Drilling Survey for Mac OS X 4.0

Directional Drilling Survey for Mac OS X

Version 4.0 available on the Mac App Store

DDS3_30_00

for iPhone	for iPad	for Mac

User Guide 3.0 (html)	User Guide 3.0 (html)	User Guide 3.0 (html)

Others software on the App Store

New in this update 4.0:

– Compatibility with the new versions for iPhone and iPad 4.0

– Revised calculations of the Turning Rate (TRN) with delta azimuth > (+/-) 180 deg between sections on the Well Planning;

– Bug fixes

Screenshots

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

August 8, 2013

Drilling Units for iPhone, iPod Touch and iPad – A free Unit Converter for Oilfield

Drilling Units

A free Unit Converter for Oilfield

for iPhone, iPod Touch and iPad – A new App

Free

This app is designed for both iPhone and iPad

This app is free and is a useful tool for the Oil & Gas community. These units are commonly used on the oilfield.

Area (sq.in, mm2, cm2)

Capacity (bbl/ft, liter/m, m3/m, bbl/m)

Density (ppg, SG, kg/liter, kg/m3)

Diameter (inch, mm, cm)

Distance (miles, km)

Dog Leg (deg/100ft, deg/30m, deg/10m)

Flow Rate (gpm, bpm, ft3/min, liter/min, m3/min)

Force (lbf, kgf, N, daN)

Length (ft, m)

Mass (lb, kg, kip, ton)

Power (hp, kw, btu/h, kcal/h)

Pressure (psi, bar, atm, kPa)

Pressure Gradient (psi/ft, bar/m, kPa/m, psi/m)

Temperature (Celsius, Fahrenheit, Kelvin, Rankine)

Temperature Gradient (oF/100ft, oC/100m)

Torque (lbf x ft, kgf x m, N x m)

Velocity (ft/s, ft/min, miles/h, knot, m/s, km/h)

Volume (bbl, gal, ft3, liter, m3)

Yield Point (lb/100ft2, kg/m2, N/m2 or Pa)

If you need others units, please contact us.

Screenshots for iPad

Screenshots for iPhone and iPod Touch

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

July 3, 2013

Well Control Simulator for iPhone and iPod Touch – User Guide

Web Version

Download PDF

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

June 21, 2013

Drilling Simulator for iPhone and iPod Touch – User Guide

Drilling Simulator for iPhone and iPod Touch

User Guide

Web Version

Download PDF

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

May 15, 2013May 15, 2013

Oil & Gas Apps for Mac OS X

A few years ago, we searched for applications in the area of oil and gas for Mac OS X and not found. Then, we develop these applications and we would like to share with friends.

We would like to share our portfolio with very low cost applications to drillers, tool pushers, engineers, chemists, students and other professionals in the petroleum industry. These are productivity tools helpful in drilling of oil wells.

These apps are completely interactive and allow users to define a wide variety of parameters for oil wells and unit system, save data, share them with friends.

These Apps are available on the Mac App Store, only.

Well Control Methods

Well Control for Mac OS X on the Mac App Store

Well Control Worksheets

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

April 30, 2013April 30, 2013

Well Control Simulator for iPhone and iPod Touch 1.4 now available on the App Store: Improvements

Well Control Simulator for iPhone and iPod Touch 1.4

Now available on the App Store

Features:

Well Control Simulator Provides a graphical very useful tool for training of roughnecks, derrickmen, drillers, tool pushers, drilling engineers and students in the well control procedures.
– Interactive System: no pre-set methods;
– Ability to apply methods: Driller’s method, wait and weight, dynamic volumetric and static volumetric (lubricate and bleed);
– Capacities and Volumes;
– Hydraulics and Hydrostatics and critical pressures calculations;
– Behavior of the kick;
– Applied with subsea stack and surface stack;

Kick Model:
The model assumes that the kick starts as a single bubble and migrates upward as a single bubble from the bottom to the surface.

Notes:

For simulation of drilling and kick detection, use another app “Drilling Simulator“.
For simulation of leak-off test, use another app “Leak-Off Test Simulator“;
For methods to control, use another app “Well Control Methods“;
For kick tolerance calculations, use another app “Kick Tolerance“;
For hydraulic calculations, use another app “Drilling Hydraulics“;

New in this update 1.4: