by Drilling Hydraulics HD (for iPad)
New in release 2.7:
– Sharing Data Files with iCloud.
The Drilling Hydraulics provides the driller, tool pushers, drilling engineers, chemists, students and other professionals in the petroleum industry a productivity tool helpful in drilling of oil wells for hydraulics calculations, optimization of the penetration rate and can help on the decision on selection of bit nozzles.
Features:
1. Defining the parameters of the well, drill string, drill bit, mud (fluid), mud pumps, circulation lines on surface, diameter and coefficient of choke and more;
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)
2. Options outstanding: Injecting into the drill string with the return flowline or by injecting the kill line to return the choke;
3. Options wells in floating units or in drilling landing rigs;
4. Use of two mud pumps in parallel;
5. Choice of rheological models (Bingham and Power);
6. Calculations of the hydraulic drill bit and the system by friction;
7. Frictional losses in all sections, also showing the length, velocity, flow regime and Reynolds number in each section.
8. Calculation of the ECD on bottom hole and the casing/liner shoe with TVD;
9. Hydrostatic calculations at the bottom hole and the casing/liner shoe with TVD;
10. Calculation of bottoms up time;
11. View for Hydraulics Optimization: Pressure x Flow rate chart with touchscreen and rotation (portrait / landscape) and scale definition. Ability to change bit depth or bit TFA for instantaneous plotting.
12. Selecting the system of units: METRIC, SI, FIELD 1 (Imperial) and FIELD 2 (mix).
13. Load / Save Data File.
14. Drillstring sections: Drill pipe 1, Drill pipe 2, Heavy Weight, Drill Collar 1 and Drill Collar 2.
15. Well sections: Riser, Casing, Liner and Open Hole;
16. Ability to select Qty / Size of Jet Nozzles of Drillbit.
17. Option for Bit TFA fixed;
18. Ability to send Hydraulics reports by email;
19. Circulating Kill Line -> Choke;
20. Directional basics Hydrostatic calculations (Bottom Hole , Casing Shoe, Liner Top and Liner Shoe TVD and Measured Depth)
 |
 |
  |
  |
 |
contact@wellcontrol.com.br
Well Control 
Leave a comment